| *Device Programmer |
|
MODEL: 1881UXP |
M1881UXP is a single site
universal programmer controlled by software run on
windows in PC through paralell port. It supports
more than 5000 programmable devices including
flash ROM, EPROM, logic device, one-chip
microcontrollers. New device can be added by
making version up of the software. It carry
out fast programmng to support high density
memory. |
|
MODEL:
1882
|
M1882 run by software on PC is compact and
fast programmer equipped with USB2.0. |
MODEL: 1895 |
M1895 is Min. 2 site and max. 8 site gang programmer. Model 1895 is newly developed gang programmer targeting high density multi chip with standard 1G bit memory. User friendly stand-alone architechrue, USB interface, remote control software runs on PC satisfiies various needs of professional customers.
|
MODEL: 1940 |
M1940 is fast 16 site gang programmer supporting NOR, NAND flash, MPU and other PORM. It is equipped with the standard 256M bits memory that can be added up to 1G bit. M1940 is Minato’s 20th generation
gang programmer. It is 2-5 times faster than
former model such as M1893 and 1931. Various
package is supported by socket adaptors on DIP.
Most of adaptors are compatible among M1940,
M1894, M1896 (except programmer support for NAND
flash).
Rental Set and
Used Set are available.
|
MODEL: 1950 |
M1950 is Minato’s 22nd generation gang
programmer. It is 7 times faster than former
model. It is equipped with the standard 4G bits
memory that can be added up to 8G bit. For data
transfer, USB 2.0 port and Compact Flash slot are
available as standard. M1950 can simultaneously
program 16 pieces of 256M bits NAND flash in less
than 40 seconds with two verify.
Rental Set and
Used Set are
available.
|
MODEL: 1986 |
M1896 is a newly designed gang programmer which can take 8 pieces of large adaptors for micro-controllers. Standard SU-816 socket units enable to program either 8 pieces of 8 bits JEDEC or 16 bits EIAJ devices. It is equipped with 32M-bytes(256M bits)memories which can be expanded up to 128M-bytes (1 G bits). |
| *Programmer Items |
|
| |
* EL-300: 308pcs max. in 28pin DIP, 210pcs max. in 40pin DIP can be erased at a time. In addition to PROMS, 4" and 6" wafers can also be set in a big tray. |
MODEL: EL-50 |
* EL-50: 56pcs max. in 28pin DIP, 48pcs max. in 32pin DIP can be erased at a time. |
| |
* EL-20: 10pcs max. in 28pin DIP, 6pcs max. in 40pin DIP erased at a time. |
